- Megatel S Remote Control Manual Free
- Megatel S Remote Control Manual
- Megatel S Remote Control Manual Instructions
- Megatel S Remote Control Manual Pdf
Download Genie Remote Control Gict390 Manual. PLUS Vision U5-732 User Manual. Remote control range, E-13. PLUS Vision Projectors. User manual remote control Philips RC-2043/01B.
E-13
Remote Control Range
Point the infrared transmitter of the remote control toward the remote control sensor located at the front or rear of the main unit
and operate.
Reception of the remote control signal should generally be possible within the range illustrated below.
Precautions
Handling of the Remote Control
* Exposure of the main unit's remote control sensor or the remote control infrared transmitter to bright light or the
obstruction of the signal by an obstacle located in the pathway may prevent operation.
* Do not drop the remote control or handle it inappropriately.
* Do not expose the remote control to water or other liquids. Should the remote control become wet, wipe it dry
immediately.
* Try to avoid use in hot and/or humid locations.
* Please keep button batteries out of the reach of children. If a battery is swallowed, promptly obtain the medical care
of a doctor.
* Remove the batteries from the remote control when it is not going to be used for a long period.
* Some operations (such as menu operations) are available only through the use of the remote control and attention
should be given to its careful handling.
Names of the Remote Control Parts/Preparing the Remote Control
ST
ANDBY
STATUS
ST
ANDBY
AUTO
SOURCE
5m/16.4feet
5m/16.4feet
3m/9.8
feet
6
m/19.7
feet
20
Megatel S Remote Control Manual Free
°
20
°
30
°
30
°
5
°
5
°
Side View
Remote control
infrared transmitter
Remote control
sensor
Top View
Remote control
sensor
Remote control
infrared transmitter
Megatel S Remote Control Manual
McConnel’s all-terrain remote control work platform boosts safety by removing operators from steep-sided, dangerous and restricted-access zones.
Capable of tackling slopes of 55 degrees, ROBOCUT has a working range of 150m and is up to 25 times more productive than manual cutting.
Overview
Designed especially for tackling tough terrain, the ROBOCUT2 RC40 features a low centre of gravity design and durable rubber tracks that make it an outstanding all-terrain mowing machine, capable of mastering slopes up to 55 degrees whilst enhancing operator safety by removing them from the danger zone.
Power comes from a 40hp, three-cylinder, Yanmar diesel engine that uses a DPF filter system to ensure it meets the latest Stage V emissions regulations without the need for Adblue.
Key features
- Proven Yanmar engine technology - Stage V compliant
- Twin roll-over protection bars
- Fully enclosed, all-metal panels
- Flailheads upto 1.6m width
- Responsive remote control unit
- 150m working range
- Innovative low centre-of-gravity design
- Choice of track options
- Robust build quality
- Comprehensive range of attachments
Features
Access all areas
ROBOCUT thrives in the toughest terrain, making it easy to work on busy highways, embankments, railway sidings, steep-slopes or riverbanks. It ensures safe, productive working without risk to life and limb.
Versatility
Megatel S Remote Control Manual Instructions
McConnel continues to expand its range of attachments, offering a tool for almost every challenge. From snow clearance to forestry, grass cutting to quarry maintenance, McConnel can provide a safe and productive remote control solution.
Megatel S Remote Control Manual Pdf
Benefits
- Up to 25 times faster than manual cutting
- Tackles slopes up to 55 degrees
- More fuel efficient than a three-man strimming team
- Multi-functional remote control capability
- Proven engine technology delivers outstanding reliability
- Easy to use proportional controls
- Work safely outside danger zones
| ROBOCUT2 RC40 Specification | |
|---|---|
Engine | |
| Make | YANMAR, 3 cylinder, Stage V |
| Horsepower | 40hp (27.5kw) @ 3000rpm |
| Torque | 105Nm |
| Fuel | Diesel |
| Fuel tank capacity | 21 litres |
| Water-cooled radiator | 3 core havy duty |
| Self-cleaning (reversible fan) | Standard manual and automatic |
| Transmission | Fine control hydrostatic |
| Maximum noise levels | 80dB(A) |
Hydraulics | |
| Independent flailhead circuit | Closed circuit piston Max 55l/min @ 280 Bar |
| Independent track drive circuit | 2 x closed circuit piston Max 57 l/min @ 250 Bar |
| Aux service | 1 double acting auxillery service |
| Independent intercooler | Standard |
| Oil tank capacity | 11 litres |
| Attachment lift capacity | 550kg |
Tracks | |
| Rubber | Standard ~ max working angle 40° |
| Rubber with spikes | Optional ~ max working angle 55° |
| Self-tightening | Standard |
| Length (axle to axle) | 1192mm |
Remote Controls | |
| Working range | 150m |
| Frequency | 434Mhz (certified by CE legislation) |
| Battery | Interchangeable, rechargeable, 2 with each unit, charge on machine |
| Proportional joysticks | Standard |
Dimensions | |
| Overall width | 1310mm |
| Overall length (without attachment) | 1960mm |
| Overall height | 1120mm |
Weight | |
| ROBOCUT2 RC40 | 1150kg |
Performance | |
| Potentiometer speed control (0 - 100%) | 1st gear (low range) Forward and back, 0 - 4km/h 2nd gear (low range) Forward and back, 0 - 7km/h |
Flailhead / Attachment | |
| Oil flow | 59 l/min |
| Pressure | 350 Bar |
| Rotor speed | 3300 rpm |
| Front and rear flaps | Standard |
| Flails | Y - Flails for cutting grass and light wood up to 30mm diameter J (hammer) - Flails for cutting thick grass and wood up to 50mm diameter |
| Rotor width | 1.3m to 1.6m |
| Roller diameter | 100mm |
| Cutting height range (via roller adjustment) | 20mm - 85mm (5 positions) Flailhead can be lifted to cut higher |
| Hydraulic lift | -300mm to +400mm |
| Floatation (angle) | 14° up and down (+/-) |
